Is your ceiling low or high?
A projector bracket suitable for any height. Available in several lengths, with the possibility of cutting to the correct length where required. Not only that – it’s also very easy to install – you can actually mount and dismount the projector and slide with one hand.

Having taken a look at the mount here in our demo room, we are mighty impressed with it. We have tested it for fit with our smallest through to largest projectors with no problems at all thanks to the supplied 2 long arms and 3 short arms.

Quick and easy to assemble and fit to the projector with generous space left to the rear of the pole for cable management which is descretly masked with a matt black cover. The matte silver and black give the mount a really nice finish.

Should you need to cut the pole to length other than the standard length supplied, the mount being constructed of aluminium is straightforward to cut. Once cut the supplied trim cover masks it neatly.

For us the SMS mount is the mount of choice and significantly cheaper than another brand offering the same solutions!

Color: Aluminum/black
Max load (Kg): 7
Tilt: 25°
Swivel: +/-360°

A wall bracket for projectors with short projection distances. Highly flexible adjustments ensure the best image quality in all situations. The projector slide is precision manufactured for each model of projector, and can be displaced along the complete column length for adjusting depth. Furthermore, the wall screen can be adjusted both horizontally and vertically. Fine adjustment is quick and easy using adjustment knobs on the slide.

Color: Aluminum/black/silver
Max load (Kg): 12
Tilt: 15°
Adjustable: The wall plate can be adjusted ± 25 mm both horizontally and vertically, and the projector can be mounted at any position along the complete column.
Other: Cables are simply and discretely hidden within the profiled column.

Silent and discreet motorized projector elevator
SMS has developed a new, silent and economically-priced projector elevator. SMS Secret has a short stroke-length, only 130mm, which makes it very stable. SMS Secret doesn´t onlyt conceal the cables, it conceals the whole lift neatly.

Holds projectors up to 12kg. The SMS Projector Unislide is included

Color: White ceiling panel
Max load (Kg): 12
Max projecktor size (mm): W: 360 H: 140 D: 320
Weight (Kg): 24
Tilt: +/-25°
Lowerable (mm): 130
Opening time (sec): 10
Top opening (mm): 600X600
Min. ceiling height (mm): 400
IR-remote control: Included


Other: The Tilt indicated is if the projectors size allows this, and refers to all directions.

These are simple but ingenious mounts. Many mounts arrive and need assembling like an Airfix kit - the Mediastar range are delivered fully assembled.

The MediaStar ceiling mount features long arms and therefore will reach the mounting holes on almost all projectors. These arms are also flexible enough that they can retract into the center of the mount.


• High quality aluminium construction
• Quick lock/unlock design using a ball and socket mechanism makes positioning the projector quick and simple
• Adjustable/detachable feet
• Comes with projector mounting screws
• Supports upto 25Kgs
• 360 degree horizontal swivel
• 30 degree vertical tilt

These are simple but ingenious mounts. Many mounts arrive and need assembling like an Airfix kit - the Mediastar range are delivered fully assembled.

The MediaStar ceiling mount features long arms and therefore will reach the mounting holes on almost all projectors. These arms are also flexible enough that they can retract into the center of the mount.


• High quality aluminium construction
• Quick lock/unlock design using a ball and socket mechanism makes positioning the projector quick and simple
• Adjustable/detachable feet
• Comes with projector mounting screws
• Supports upto 25Kgs
• 360 degree horizontal swivel
• 30 degree vertical tilt
• Aesthetic Ceiling plate cover available

These are simple but ingenious mounts. Many mounts arrive and need assembling like an Airfix kit - the Mediastar range are delivered fully assembled.

The MediaStar ceiling mount features long arms and therefore will reach the mounting holes on allmost all projectors.


• High quality aluminium construction
• Quick lock/unlock design using a ball and socket mechanism makes positioning the projector quick and simple
• Adjustable/detachable feet
• Comes with projector mounting screws
• Supports upto 25Kgs
• 360 degree horizontal swivel
• 30 degree vertical tilt

• Use flush to ceiling - only 124mm drop to top of projector
• Optional extension bars are included to increase ceiling drop to 212mm or 300mm
• +/-37° tilt adjustment, 360° Swivel at mount
• Aviball technology allows easy adjustment and simple locking in place
• Coverplate included for smart installation
• Includes unique universal carousel mount to fit all LCD / DLP projectors with all mounting hardware included
• Maximum distance between any 2 fixing points: 340mm
• Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
• MAX LOAD 15KGs

• Use flush to ceiling - only 124mm drop to top of projector
• Can be mounted onto any 50mm extension poles and 1.5” NPT pipes for alternative installations.
• +/-13° tilt adjustment, +/-6° roll adjustment & 360° swivel
• Maximum distance between any 2 fixing points: 370mm
• Micro-adjustment feature for short throw projectors
• Theft-deterrent security fasteners as standard
• Pre-assembled for simple three step installation
• Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
• MAX LOAD 25KGs

• Use Flush to ceiling - only 135mm drop to top of projector
• Optional extension bar is included to increase ceiling drop to 280mm
• +/- 90 degrees tilt adjustment, 360 degrees swivel at mount
• Coverplates included for smart installation
• Safety wire for extra security
• Maximum distance between any 2 fixing points is 340mm
• Suitable for projectors with M2.5, M3, M4, M5 and M6 screw threads
• MAX LOAD 15KGs

BT882 adjustable ceiling drop: 500mm - 750mm

• Outer tube diameter: 42mm
• Inner tube diameter: 35mm
• +/-50° tilt of pole for angled ceilings
• +90° tilt adjustment, 360° Swivel at mount
• Coverplates included for smart installation
• Hand lever allows easy adjustment of ceiling drop
• Safety wire for extra security
• Cable management
• Maximum distance between any 2 fixing points: 340mm
• Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
• MAX LOAD 10KGs

BT883 adjustable ceiling drop: 750mm - 1222mm

• Outer tube diameter: 42mm
• Inner tube diameter: 35mm
• +/-50° tilt of pole for angled ceilings
• +90° tilt adjustment, 360° Swivel at mount
• Coverplates included for smart installation
• Hand lever allows easy adjustment of ceiling drop
• Safety wire for extra security
• Cable management
• Maximum distance between any 2 fixing points: 340mm
• Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
• MAX LOAD 10KGs

• Adjustable distance from the wall to centre of ball joint: 110mm - 360mm
• Quick release and simple hook-on installation with all mounting hardware included
• +/-37° tilt adjustment, 360° Swivel at mount
• Coverplate included for smart installation
• Projector can be inverted
• Cable management
• Maximum distance between any 2 fixing points: 340mm
• Cable management
• Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
• MAX LOAD 15KGs

The ProMount flush fit projector ceiling mount gives you everything you need for a quick, easy installation, low-profile look and hassle free projector maintenance.


• Great flexibility and adaptability.
• Pitching upwards and downward up to 20 degrees
• 360 degrees rotation.
• Fast disconnection for simple maintenance.
• Concealed cable management.

The Chief RSAU offers a compact design for smaller projector chassis.

• Features independent roll, pitch and yaw for quick and precise projector installation.
• Quick connect/disconnect with convenient lamp and filter access on most projectors.
• Disconnecting maintains installation and doesn't affect preset adjustments
• All­Points Security steel­into­steel locking hardware at all connection points protects against theft
• Multiple installation options including: flush mount to ceiling, use 0.25 inch threaded rods, or use a 1.5 inch NPT column Now includes new universal interface to further reduce installation time

Specifically desgined for home cinema projectors as these projectors have mounting holes which are further apart making standard universal mounts unsuitable. The Cheif ceiling mount features longer arms and therefore will reach the mounting holes on all home cinema prjectors weighing up to 23KGS.


• Quick connect/disconnect design
• Adjustable feet - no spacers required
• Independent adjustments - makes alignment easy and precise
• Supports upto 23Kgs
• Roll of up to +/- 6 degrees
• Swivels through 360 degrees

If you have a projector that weighs under 10kgs but have found that universal mounts do not fit for what ever reason then the GK series is the mount for you.

These mounts allow you to tilt or turn your projector anyway you need and are ceiling, wall or base fixable. Trilock docking system allows removal of projector for secure storage or servicing. Simply fit the custom made adapter plate for your projector (please state projector make and model when ordering) then plug, twist and lock it in position and adjust for tilt and level.

If you have a large installation projector or a projector that weighs in excess of 10kgs, chances are you will need a specialist mount - the Unicol Projector Suspension Unit (PSU).

The PSU can be suspended using a ceiling plate, tube mount and drilled column (sold in 1m length).All PSU's have full swivel and tilt mechanism, acheived by friction and once correctly adjusted will remain as set.

SAFETY:we recommend installation of the PSU mount by a qualified tradesperson, to ensure safe installation.