Free UK Delivery

Fast & reliable

Rated 4.9 / 5 on

We go above and beyond for our customers >>

Freephone 0800 073 0833

Technical Sales Advisors

Panasonic PT-RW630LBEJ

This product is discontinued.

Please call us on freephone 0800 0730833 for expert help.

    • 6500 lumens brightness
    • WXGA resolution
    • 3 Years Return To Base warranty


WXGA (1280 x 800, 16:10)
6500 lumens
Contact us Contact us

FREE UK Mainland Delivery

  • Image Quality
  • Features
  • Connectivity
Write Your Own Review
You're reviewing:Panasonic PT-RW630LBEJ
Your Rating
Screen Size Calculator

To make sure this projector is the right fit for you room

Panasonic logo

A new heat-resistant material is used in the phosphor wheel to withstand the high output of the laser light source. Combined with a drive system that is also optimized for the light source, this made it possible to achieve the world’s first 1-Chip DLP 6,500 lm of brightness in a 1-chip DLP™ projector. Actually, the result of Panasonic efforts to optimize color reproduction enabled a perceived brightness that even exceeds the specification values, thus opening the door to a wide range of applications for the PT-RZ670 and PT-RW630.

It is almost impossible to imagine that a laser light source would suddenly go blank.The PT-RZ670 Series uses two sets of light sources that group laser diodes into a number of modules. Based on redundant design, the laser diodes are put to considerable use, so over the long term, if a laser diode were to stop functioning, a protective circuit would activate to keep the brightness drop extremely small. Even if this were to happen during 24/7 operation, it would not result in downtime. The dual drive structure also keeps the optical engine output uniformly bright and colorful even if the light source's original brightness is different due to aging degradation.

The rate of brightness deterioration in the laser light source is extremely slow compared to lamp-based projectors. Built-in brightness and color sensors eliminate fluctuations in brightness and color to constantly maintain the optimal balance. Together with a durable optical system, the PT-RZ670 Series maintains excellent picture quality for a long period of time. In many cases, this means no maintenance until the next refresh cycle.

The PT-RZ670 Series employs newly developed cooling systems for the laser light source and DLP chip to suppress temperature rises inside the projector, allowing stable operation up to an ambient temperature of 45°C (113°F)in environments 0m to 4200m above sea level in normal mode. The use of these cooling systems also achieves quiet operation of 35 dB, enabling viewers to concentrate on the projected content.

The area between the laser light source to the DLP™ chip and prism is sealed to form an airtight structure for the optical block, the heart of the projector. This resists the effects of dust and other particles in the air, and enables use of the projector in a wide range of environments. This dust-resistant structure also maintains excellent picture quality and brightness for a long time and enables filter-free operation, all of which contribute to a lower TCO.

Geometric correction : This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed and also, up to three sets of adjusted data can be stored as PC1, PC2 and PC3.New 4-Corner Adjustment and Keep Aspect Off functions also simplify fine adjustment.

The Geometry Manager Pro software offers a more flexible and complex geometric adjustment capability, and supports color matching and edge blending for multi-screen projection. It also makes adjustments for multiple projectors fast and easy over a network.

The ET-CUK10 Auto Screen Adjustment Upgrade kit activates the Auto Screen Adjustment plug-in software. This plug-in software for Geometry Manager Pro sets up multiple projectors automatically and simultaneously, greatly saving installation time and costs. It takes only three quick and simple steps. By using a camera** together with a PC connected to the projectors via a network, this software calibrates and adjusts multi-screen or curved-screen projection. Adjustments include geometric adjustment, edge blending, color matching, stacking, brightness, and black level.

Optional Lenses : Choose from a wide lineup of lenses for your system, including long-throw zoom lenses and a ultra-short-throw lens for rear projection use.The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.The ET-DLE030 ultra-short-throw lens enables 100-inch projection from a distance of 0.82 m (2.7 ft). This is a powerful solution for the hassles of installation in narrow spaces.

Benefits of the PT-RW630 Series

1. Long-lasting reliability and high picture quality
The world’s first* brightest 6,500-lm brightness as a laser light source 1-chip DLP™ projector
Bright, beautiful picture quality for a long period of time.
Reliable drive system enables continuous 24/7 operation with no downtime
Long-lasting brightness and low maintenance enable TCO (total cost of ownership) to be reduced
Laser light source and filter-less design allow maintenance-free of 25,000 hours**
Newly designed optical system achieves high reliability and excellent color reproduction
A new liquid cooling system maintains quiet, long-term, stable operation while keeping the exhaust heat extremely low
A filter-less, dust-resistant structure with an airtight optical block
Detail Clarity Processor 3 gives natural clarity to even the finest details
System Daylight View 2 enhances color perception with no need to turn off the lights
Advanced technologies for excellent image quality including full 10-bit signal processing
DICOM Simulation mode reproduces easy-to-view to view rendering of X-ray photos***
Rec. 709 mode to provide accurate colors
Waveform Monitor for easy and precise calibration

2. Expanding installation flexibility
Multi-Screen Support System seamlessly connects multiple screens: edge blending, color matching and multi-screen processor
Multi-Unit Brightness Control function
Projection is possible with a flexible layout thanks to vertical and horizontal 360-degree installation
Lens-centered design and a wide horizontal/vertical lens shift
Geometric Adjustment for specially shaped screens (PT-RZ670)
Optional Upgrade Kit ET-UK20 featuring Geometry Manager Pro for more flexible geometric adjustment and modified masking functions (PT-RZ670)
Optional ET-CUK10**** Auto Screen Adjustment Upgrade Kit for automatic multi-screen projection setup (PT-RZ670)
A wide selection of optional lenses including the ET-DLE030 ultra-short throw lens

3. Professional system integration
DIGITAL LINK transmits digital signals (HDMI, uncompressed HD video, audio, and control signals) up to 100 m (328 ft) with a single CAT5e cable or higher
Quick on/off: Image appears immediately and no need for cooling after use
Shutter function with fade in/out effect
No on/off cycle limitation
Art-Net***** compatible
Abundant terminals, including SDI (3G/HD/SD), DVI-D and HDMI inputs
Optional ET-YFB100G Digital Interface Box for single cable solution
Optional ET-MWP100G Multi Window Processor for multi-screen solution
Multi Projector Monitoring and Control Software allows multiple projectors to be managed together over a wired LAN or RS-232C
Web Browser Control
PJLink™ compatible
* For 1-chip DLP™ projectors, as of January 2014.
** A guideline for light source replacement. The maintenance-free period may be shortened due to environmental conditions.
*** This product is not a medical instrument. Do not use it for actual medical diagnosis.
**** Availability is limited to certain regions only.
***** Art-Net is a protocol for transmitting the lighting control protocol DMX512 over Ethernet.


Light Source
Display Type
DLP (1 Chip)
Brightness (Lumens )
Contrast Ratio
Lens Type
Lens Ratio
Optical Zoom
Lens Shift Vertical Positive (%)
Lens Shift Vertical Negative (%)
Lens Shift Horizontal Positive (%)
Lens Shift Horizontal Negative (%)
Keystone Horizontal Negative (degrees)
Keystone Horizontal Positive (degrees)
Keystone Vertical Negative (degrees)
Keystone Vertical Positive (degrees)









VGA in


VGA out


BNC Video


Composite Video


Component Video


USB for display and control


USB Type A for power


USB for PC Less Presentation

RJ45 For Control/Monitoring


RS232 For Control


Screen Trigger



Dimensions (W x H x D) in cm

x x

Weight (Kg)

Fan Noise (db)

Fan Noise in Eco Mode (db)

Audio Output (Watts)

Chassis Colour

Lamp Life (Hours)

Lamp Life Eco Mode (Hours)


Projector Warranty
3 Years Return To Base
Lamp Warranty

Product References

P3897 / 1001

Please see below Panasonic document downloads:

© Projectorpoint 2022 all rights reserved